If you buy a new garage door, you might be wondering how to save money on installation and setup. If you are a handyman and have a few hours (or days) in front of you, you can try installing the garage door yourself. How can you do this without damaging the door and paying for repairs before installation? This article explains the basic steps to organizing your own garage door.
Gather the tools needed
You may need tools such as screwdrivers, drills, nails, screws, bolts and staples to successfully install your garage door. Make sure the tool is near you and you should use parts that have been provided by the manufacturer.
Remove the old garage door
If this step is no longer done, you must disconnect the old door before you can install the new one. First remove the roller and open the fittings (springs, rollers, etc.). You can then disconnect the road system and remove the door panel. Remove panel by panel so as not to attack them. Make sure children and / or pets are not in the garage during the process because parts may fall to the floor.
After installing the door and possibly preparing the first panel by attaching it to the door, you can attach a metal rail to the wall. You can then place the brackets and rollers on the first plate. Ask a friend or family member to help you lift the second panel to mount the casters on the left and right sides of the door, and fasten the hinges to the panel with strength training. Repeat the process for the last panel.
Complete song installation
Connect the wing bracket to the rail and secure it securely to the frame. Make sure you don’t tighten this component too tightly. If the door is uneven, you might need to start the process again. You can then mount the wall bracket to the wall to finish installing horizontal rails. It must be cut to the length needed to support the track.
Torsion tubes can be provided by the garage door repair Bolingbrook factory. If you have it, install it. They are useful for opening and closing doors manually. Finally, pull the door high enough so that you can double check that the rails are installed properly and the panels are flat. You can then tighten the bracket to secure the entire structure.
Installing a garage door shouldn’t be complicated. If you understand the process well enough, you might be able to do it yourself. However, always prepare a device number if you need help. Don’t wait until you break a new door to call in a professional, but do so if you are unsure about installing your garage door. Otherwise, unnecessary injuries and repairs to the garage door can occur.